Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ and TASE: CIMT) company, announced today that GibbsCAM has been certified for Autodesk Inventor 2014 3D mechanical design software under the Autodesk Certified Apps Program. Certification for Autodesk Inventor 2014 marks the thirteenth consecutive year that GibbsCAM has been certified under the program, having achieved certification every year since the program began.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, announced today that many of the new features and enhancements planned for GibbsCAM 2013 will be demonstrated at EASTEC 2013, in booth #5426, from May 14-16.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron company, today announced its participation at HaasTec 2013, the Haas Open House, in support of machine-tool builder Haas Automation. GibbsCAM supports the entire line of Haas vertical and horizontal CNC machining centers, lathes, multi-task machines, 5-axis rotary tables and indexers, and the new UMC 750 5-axis vertical machining center to be featured at the event. Easy-to-use CNC programming features include programming for 5-axis simultaneous machining, tombstone management, multi-task machining (MTM), toolpath verification, machine simulation and post processors. Haas will hold the HaasTec 2013 Open House at its manufacturing and headquarters facility at 2800 Sturgis Road, in Oxnard, California. The event will run daily, 8:00 A.M. to 5:00 P.M., from April 9-12, 2013.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron company, today announced that it will demonstrate its industry-leading GibbsCAM MTM (multi-task machine) CNC programming software at the 2013 Precision Machining Technology Show (PMTS), to be held at the Greater Columbus Convention Center in Columbus, Ohio, April 16-18, 2013. The entire suite of the forthcoming GibbsCAM 2013 software release will also be available for previewing in the GibbsCAM booth #906.

Names Terry Wohlers as First Member

“The creation of a 3D printing advisory board, and Mr. Wohlers’ appointment to it, is aimed at accelerating Cimatron’s efforts in entering the additive and hybrid manufacturing field,” said Mr. Danny Haran, Cimatron’s President and CEO. “We are pleased and honored to have Mr. Wohlers on board, and believe that his wide experience and knowledge of this fast emerging industry will assist us in identifying ways in which we can further our efforts to serve the global manufacturing market as effectively and innovatively as possible.”

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, announced today that it will demonstrate how GibbsCAM software is optimized for machining parts designed in SolidWorks® at the SolidWorks World 2013 Conference. Gibbs has also been selected to give a presentation called “Machining SolidWorks Features.” The presentation, to be delivered by Steve Aughinbaugh, GibbsCAM applications engineer, from 6:45PM-7:00PM, Monday, January 21, 2013, will highlight GibbsCAM’s new capabilities that provide optimal integration between SolidWorks and GibbsCAM. The presentation focuses on the simplification of machining solids created in SolidWorks. Mr. Aughinbaugh will demonstrate how GibbsCAM uses Knowledge Based Machining to automatically read SolidWorks part features and machine them with a single mouse click. In addition to the presentation, GibbsCAM demonstrations will be available in Booth 606 of the Partner Pavilion. The conference is being held from January 20-23, 2013, at the Walt Disney World Swan and Dolphin hotel facility, in Lake Buena Vista, Florida.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ and TASE: CIMT) company, announced today that it has been selected for membership in Okuma America’s Partners in THINC, a collaborative network of over 40 companies that service the metal-cutting and manufacturing industry with specialized software, equipment, expertise and a commitment to solve problems and increase productivity for end users. With Okuma’s open architecture, PC-based THINC®-OSP control as its nucleus, Partners in THINC strive to provide the best possible integrated solutions to end users.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, announced today that it has introduced the GibbsCAM Student Edition, for worldwide availability, concurrent with the introduction of a new on-line Student Store, to enable purchase and download of the software, and to provide student resource materials. The Student Edition, which complements the GibbsCAM Classroom Edition, is available immediately to NC programming or machining students of high schools, technical schools, colleges and universities already using GibbsCAM in their curricula. Fully compatible with the Classroom Edition, the Student Edition is available for direct purchase and immediate download at the new GibbsCAM Student Store – US$100.00 for a calendar-year license – to students enrolled in a qualified curriculum.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ and TASE: CIMT) company, announced today that it will participate in three sessions within the manufacturing track at Autodesk University 2012, where it will also have an exhibit. Bill Gibbs, company founder and president, will be a member of two panel discussions, one on CAM selection criteria and considerations, and another on the future of CAD/CAM. Mario Guerrero, Gibbs’ technical support manager and GibbsCAM trainer, will conduct a hands-on demonstration of a GibbsCAM workflow for making and programming parts for CNC machining. The company will also exhibit its latest version of GibbsCAM, in Booth 435. Autodesk University 2012 will run from November 27-29, at Mandalay Bay, 3950 Las Vegas Boulevard South, Las Vegas, Nevada.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, announced today that its founder and president, William F. (Bill) Gibbs, will be the speaker at the Okuma “Go Beyond Productivity to Profitability” open house, in Houston, Texas. Okuma and machine-tool distributor Hartwig will have nine models of multi-axis lathes, multi-axis mills and multitasking machines on display and in operation, running CNC programs generated with GibbsCAM. Okuma partners will also exhibit peripheral equipment at the Houston Open House event, which will be held on Thursday, November 15, 2012, from 10:00 AM to 3:00 PM Central Time, at the Okuma Houston Tech Center, 4727 South Pinemont, Suite 200, Houston, Texas. Additional information is available at the event site: http://www.okuma.com/events/P2P121115

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, and SPRING Technologies, developer of NCSIMUL, a major standard for NC program simulation and feed rate optimization, announced results of a collaborative effort with the release of the SPRING Technologies NCSIMUL Plug-in for GibbsCAM. The plug-in provides GibbsCAM users direct access to the NCSIMUL application, which assists programmers with NC program analysis and verification, and provides machine-tool simulation with error and gouge detection. After NC programs are corrected of errors and gouging, and fully verified, NCSIMUL provides options to optimize program parameters to improve toolpath cycle time and cutting tool efficiency. The NCSIMUL plug-in is supported by SPRING Technologies, and is immediately available, worldwide, from SPRING Technologies and its resellers.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron company, announced today that GibbsCAM will be demonstrated as part of Haas Automation’s annual Demo Days, to be held at numerous Haas Factory Outlets (HFOs), in the U.S. and Canada, on October 10th.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, announced today that it will be demonstrating its new GibbsCAM 2012+ version at the BI-MU trade show to be held in Milan, Italy, from October 2-6, 2012.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, today announced its leadership role in supporting phase one of the DMG/Mori Seiki standardization initiative. It will ultimately provide DMG/Mori Seiki customers a smooth and reliable flow of programming data from any CAM system to DMG/Mori Seiki machine controls. This will enable the full use of the features of their machines and controls without the need for custom post-processors or machine simulation models. The technology is based upon DMG/Mori Seiki’s implementation of the standard APT (automatically programmed tool) language, with DMG/Mori Seiki extensions that are supported within GibbsCAM. DMG/Mori Seiki’s initial focus during phase one is on its 3- to 5-axis machining centers and controls, with an ultimate goal of enabling the technology for all of its machines, including the most challenging multi-task machines. As new machines and machine functions are introduced, DMG/Mori Seiki and Gibbs will incorporate the new capabilities into their APT implementation.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, today announced that it will support various machine tool companies with its GibbsCAM 2012+ NC programming software at the International Machine Technology Show (IMTS 2012), September 10-15, 2012, at McCormick Place, Chicago. Some machine tool builders will be machining parts programmed with GibbsCAM, while others will also host GibbsCAM demonstrations, highlighting the software’s latest capabilities and its leadership in programming high-speed machining and multi-task and multi-axis machines. GibbsCAM 2012+ includes new features and enhancements across the product line, with a continued emphasis on ease of use, so that customers can achieve the highest speed, accuracy, efficiency and reliability in programming. In addition to supporting machine tool partners, GibbsCAM will have its own exhibit in Booth E-3310.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, announced today that it will be demonstrating the next generation of its MTM programming solution and Automated Programming capabilities at the International Manufacturing Technology Show (IMTS 2012), September 10-15, 2012, at McCormick Place, Chicago, in Booth # E-3310.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, announced today the release of the latest version of GibbsCAM CNC programming software. Called GibbsCAM 2012+, this new version includes tremendous speed and performance improvements, including a rendering option specifically geared for multi-axis parts, improved cutting strategies and many productivity enhancements. The new version includes improvements for all levels of GibbsCAM, including the Mill and Lathe Production, SolidSurfacer, Radial Milling, MTM and 5-Axis options.

Cimatron Limited (NASDAQ and TASE: CIMT) today acknowledged the highly successful reception that its signature solutions, CimatronE and GibbsCAM, received at the recent ACMEE trade show in Chennai, India.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, today announced that GibbsCAM customer, Blue Chip Engineering, has engineered and machined a mobile sculpture to be awarded as part of an international prize, on June 6, 2012. On that day, the Buckminster Fuller Institute will announce the winner of its Buckminster Fuller Challenge, an annual international design competition that provides a $100,000 prize “to support the development and implementation of a strategy that has significant potential to solve humanity's most pressing problems.” The prize, to be announced and presented at the Frederick P. Rose Auditorium, 41 Cooper Square, in New York City, is accompanied by a trophy in the form of “OmniOculi,” a sculpture designed by artist Tom Shannon.

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, announced today that it will support machine tool distributor Methods Machine Tools with demonstrations of its GibbsCAM CNC programming system at the Methods Metal Storm 2012 Open House event. GibbsCAM’s programming capabilities will be featured in support of programming and post-processing to make parts on Nakamura-Tome multi-tasking machines. The Nakamura MTMs are among the 50 machine tools to be on display, under power, at the event. Other machines include Matsuura machining centers, Kiwa-Japan horizontal machining centers, Exeron die-sinking EDMs, Fanuc drills and wire EDMs, plus Feeler lathes, vertical machining centers, horizontal boring mills and 10-meter bridge mills. Methods Machine Tools will also hold technical seminars on various metalworking topics during the two-day event, which will be held at its headquarters, 71 Union Avenue, Sudbury, Massachusetts, on June 13-14, 2012.